Go Back
Print

DIY Over The Table Rod Stand

Easy tutorial to make a DIY over the table decorative rod stand.
Active Time45 minutes
Additional Time2 hours
Total Time2 hours 45 minutes
Course: DIY
Keyword: decorative stand, diy project, over the table rod stand., over the table stand, rod stand
Yield: 1
Author: Rachel

Equipment

  • Jig Saw
  • Miter Saw
  • Drill
  • Drill Bit

Materials

  • 2 - 1 x 4 board cut 45 inches long
  • 2 - 1 x 4 board cut 14 inches long
  • 2 - large L brackets
  • 4 - small L brackets
  • Black Paint
  • 1 inch dowel rod slightly longer than your table.
  • 4 heavy duty clamps

Instructions

  • Cut boards to length with a miter saw
  • Draw any decorative design on top of the boards
  • Cut the decorative design with jigsaw
  • Drill holes in boards for the dowel rod
  • cut the dowel rod to the length is needed
  • Attach the base board to the rod stand with a large L bracket
  • Secure with two small L brackets on each side of the rod stand for added stability.
  • Paint or stain your rod stand and a dowel rod. Allow drying
  • Attach the over the table rod stands to each end of your table with clamps
  • add dowel rod to the drilled holes.
  • Decorate with garlands, flowers, string lights , etc.